- Not available
Collectible TF1 Tintin resin figurine - MÜLLER REAPPEARS
New collection of resin figurines of international edition, marketed in France and Belgium previously. They are made with exceptional finishes, hand painted and with an absolute respect for each original character of the comics.
Collectible TF1 Tintin resin figurine - MÜLLER REAPPEARS
New collection of resin figurines of international edition, marketed in France and Belgium previously. They are made with exceptional finishes, hand painted and with an absolute respect for each original character of the comics.
Collectible TF1 Tintin resin figurine - HERNANDEZ DISGUISED AS A CHINAMAN.
This hand-painted figurine is from vignette C1 (page 45) of the album The Blue Lotus. In the vignette he appears with his professional partner, Fernandez, in the streets of Shangay, surrounded by Chinese people laughing at them, since they have chosen classic old-fashioned attire to go unnoticed.
Features:
Collection: TF1
Scale: 12cm
Material: Resin
Finish: Hand painted
Tintin collectible figure hand painted in resin: Corporal Diaz, the clumsy terrorist
In The Broken Ear (page 23, vignette D9), Diaz plots an assassination attempt that, as is often the case, ends in failure. Formerly aide-de-camp to General Alcazar, he has never gotten over his demotion to the rank of corporal. This punishment was imposed after he remarked that there were "too many colonels and not enough corporals." Since then, he has hatched numerous plots to exact revenge. Unfortunately for him, his bad luck and incompetence make him more of a comical than a dangerous adversary.Featuring the likenesses of the main characters from The Adventures of Tintin, the 12cm figurines are crafted with meticulous attention to detail from Hergé's drawings. These resin pieces are finely crafted and hand-painted.
Features:
Collection: TF1
Scale: 12cm
Material: Resin
Finish: Hand painted
Collectible TF1 Tintin resin figurine - THOMPSON JAMMED 42230 (2021)
New collection of resin figurines of international edition, marketed in France and Belgium previously. They are made with exceptional finishes, hand painted and with an absolute respect for each original character of the comics. This resin figurine is that of Thompson trying to remove the bowler hat from his head, corresponding to page 57 3C of the album The Secret of the Unicorn.
Collectible TF1 Tintin resin figurine – HADDOCK EMPTY BOTTLE 42195
This figurine, hand-painted, corresponds to vignette B2 (page 26) of the album Tintin in Tibet, when Captain Haddock and the rest of his companions set out in search of Tchang. At this moment, the grumpy captain is upset because he has run out of whisky.
Height: 12 cm
Collectible TF1 Tintin resin figurine - TINTIN WITH HIS SUITCASE
This hand-painted figurine of Tintin corresponds to the vignette C3 (page 2) of the album Tintin in America. The intrepid journalist wears armor alone in this adventure and, in this particular scene, he heads on foot to Chicago after being abandoned in the middle of the road by the cab driver, who is actually a gangster.
Height: 12 cm.
Collection of resin figures made with exceptional finishes, hand painted and with an absolute respect for each original character of the comics. This figure of Tintin corresponds to the A3 cartoon (page 18) of the album Tintin in America. The intrepid journalist is dressed as a real cowboy of the Wild West to follow the trail of the villain of the story: Dawson.
Features:
Material: Resin (hand painted)
Dimensions: 11 cm (height)
Collectible TF1 Tintin resin figurine - PROFESSOR CALCULUS GARDENER 42211
This figurine, hand painted, corresponds to the vignette C3 (page 23) of the album The Castafiore Emerald. It is of professor Professor Calculus dressed as a gardener.
Height: 12 cm.
Collectible TF1 Tintin resin figurine – SNOWY BONE
This figurine, hand-painted, corresponds to the cartoon A1 (page 6) of the album The Crab with the Golden Claws. In it, Milou, with a bone in his mouth, walks through the streets of Brussels with Tintin before starting his new adventure.
Height: 7 cm.
Collectible TF1 Tintin resin figurine - SCOTTISH TINTIN 42192
This figurine of Tintin, hand painted, corresponds to the vignette B4 (page 40) of the album The Black Island. The Belgian reporter is dressed in the traditional Scottish clothes ready to discover the strange affair related to the beast of Kiltoch castle.
Height: 12 cm.
FIGURE TF1 RESIN - ABDALLAH
Tintin collection figure in resin - Abdallah monochrome black color in satin finish.
Height 9 cm.
FIGURE TF1 RESIN - SNOWY WITH A CRAB CAN
This hand-painted figure of Snowy with a can corresponds to the cartoon D2 (page 1) of the album The Crab with the Golden Claws.
Height: 6,1 cm.
Like Hitchcock, who appeared furtively in his films, Hergé was wont to slip into his comics.Also, in King Ottokar's Sceptre (page 38, vignette D1), he can be seen among the crowd of guests invited by King Muskar XII to attend the private concert given by Castafiore in the Palace's Festival Gallery.It is therefore as a simple spectator—and a discreet witness—that he witnesses the arrest of his hero.Featuring the likenesses of the main characters in The Adventures of Tintin, the 12cm figurines are made of resin, respecting the details of Hergé's drawings.
Features:
Collection: TF1
Scale: 12cm
Material: Resin
Finish: Hand painted
Alonzo Perez, the mastermind
In The Broken Ear (page 27, vignette B3), Alonzo Perez reveals himself to be the mastermind of the criminal duo he forms with Ramon Bada, his clumsy accomplice. Behind the facade of his peaceful villa named "Ray of Sun," this engineer hides dark designs: to steal the Arumbaya fetish in order to seize the diamond it contains. As discreet as Bada is flamboyant, Perez nonetheless displays the same criminal tenacity... inevitably foiled by Tintin. Featuring the likenesses of the main characters from The Adventures of Tintin, the 12cm figurines are crafted with meticulous attention to detail from Hergé's drawings. These resin pieces are finely crafted and hand-painted
Features:
Collection: TF1
Scale: 12cm
Material: Resin
Finish: Hand painted
Collectible TF1 Tintin resin figurine - WANG JEN GHIE 42219
This figurine of Wang Jen-Ghié, hand-painted, corresponds to the vignette A1 (page 23) of the album The Blue Lotus. This character is Didi's father and leader of the secret society The Sons of the Dragon.
Height: 12 cm.
A soldier with character. In Tintin and the Picaros (page 40, vignette C1), General Alcazar rages against his troops. And for good reason: they're getting drunk on alcohol parachuted in by the henchmen of his rival, Tapioca. Ouch, caramba, it's hard to start a revolution under these conditions! Featuring the likenesses of the main characters from The Adventures of Tintin, the 12cm figurines are crafted with meticulous attention to detail from Hergé's drawings. These resin pieces are finely crafted and hand-painted.
Delivered in transparent cylindrical packaging.
Collection: The 12cm Figurines
Collectible TF1 Tintin resin figurine - Demon Snowy. 42236 (2022)
Inspired by the vignette 4B of the page 45 of the album Tintin in Tibet, finally these figurines arrive in the collection of resins TF1. A demon who wants to make you fall into the temptation of the bone... and wait for the message.
Characteristics:
Height: 7 cm
Material: hand-painted resin
Edition: Not limited and not numbered.
Collection: TF1
COLLECTIBLE TINTIN PVC FIGURINE - HADDOCK MOON - 8CM
COLLECTIBLE TINTIN PVC FIGURINE of Haddock astronaut. The piece corresponds to the cartoon B3 (page 44) of the album Goal: The Moon. The captain inspects with the rest of the protagonists the facilities of the lunar rocket. Haddock is also wearing the astronaut suit after performing several tests with it.
Collectible TF1 Tintin resin figurine – SNOWY BONE
This figurine, hand-painted, corresponds to the cartoon A1 (page 6) of the album The Crab with the Golden Claws. In it, Milou, with a bone in his mouth, walks through the streets of Brussels with Tintin before starting his new adventure.
Height: 7 cm.
Collectible TF1 Tintin resin figurine – ANGEL SNOWY 42235 (2022)
Inspired by the cartoon 4B on page 45 of the album Tintin in Tibet, these figurines have finally arrived in the TF1 resin collection.
An angel reminding Snowy what his duty is... to carry a message.
Characteristics:
Height: 7 cm
Material: hand-painted resin
Edition: Not limited and not numbered.
Collection: TF1
Red semi-waterproof Tintin and Snowy bag 45 x 38 x 20 cm
Tintin PVC keychain - Tintin Bust - 4CM
Tintin bust keychain in PVC
Characteristics:
Size: 4 cm.
Material: PVC
Collectible TF1 Tintin resin figurine - MÜLLER REAPPEARS
New collection of resin figurines of international edition, marketed in France and Belgium previously. They are made with exceptional finishes, hand painted and with an absolute respect for each original character of the comics.